RC Lights New LED Controller Released – 6 LED microBRAKE
The microBRAKE 6 LED Controller can directly power up to 6 LEDs as current limiting resistors are built right in. Using the microBRAKE 6 LED Controller, LEDs can be directly powered from the throttle channel of the RX using the included RX Pass-Thru (mini Y-harness). Also dual intensity brake light action is built right in and the throttle channel input fully reversible.
LEDs are split into two banks: 4 constant; and 2 switched dim or full bright depending on throttle stick position (Gas or brake.) It has throttle center-stick auto-detect for precise lighting effects every time.
Controller Only RCL5052 – 6 LED Controller – microBRAKEâ„¢
Car & Truck 5mm System RCL5006 – Dual Head & Electronic Brake Lights [5MM, 14″]
RPM 3mm System RCL106-MB – 6 LED System for RPM Canisters [3MM, 4″, 24″]
All LINK channels have been eliminated to make a nice, compact little controller capable of the most common of needs for Car and Truck bodies.
Bundled with these complete systems: #5006 & #106-MB
- #5006: Is a universal LED system that can be installed in any 1:12 to 1:8 size Radio Control Car or Truck with accessible throttle servo or ESC plug. Everything needed for a complete installation is included with every system.
- #106-MB: Is a LED system designed for use with RPM Light Canisters. This system will light the 4 LED front bumper or 4 LED narrow roof bar AND provide dual intensity brake light action for the 2 LED tail lights. Everything needed for a complete installation is included with every system.
ALL LEDS ARE BACKED BY A LIFETIME WARRANTY
- RCL5052 microBRAKEâ„¢ 6 LED CONTROLLER $65.00
- RCL5006 DUAL HEAD & ELECTRONIC BRAKE LIGHTS [5MM, 14″] $90.00
- RCL106-MB 6 LED SYSTEM FOR RPM CANISTERS [3MM, 4″/24″] $90.00
Source: RC Lights
