Team Durango DEX210/DX410 Hop-Ups by Tresrey

Tresrey has launched these new hop-up products for the Team Durango DEX210 and DEX410 range of chassis' and they are expected in early February. See our gallery below:

TYTD066 Aluminium Battery Thumb Nut (red/2pcs/DEX210)
This is a direct replacement for the standard plastic ones.

TYTD074 Axle Shaft (for B4.1 wheel/2pcs/DEX210)
This steel axle shaft is for the Team Durango DEX210 to allow use of the Team Associated 2WD front wheel.

TYTD075 Aluminium Big Bore Shock Preload Nut (red/4pcs/DEX210/410/DESC410R)
This aluminium preload nut offers more durability and comes with the O-Ring included.

TYTD076 Aluminium 14mm Hex Wheel Hub Clamp Type (red/2pcs/DEX210/410)
Clamp type hex hub for more reliability and prevents the wheel pin from falling out.

TYTD078 Aluminium RF Suspension Hanger (kick-up 2-degrees/DEX210)
Aluminium RF Suspension Hanger offers for more stiffness and durability. It changes the kick-up angle to 2-degrees.

TYTD079 Aluminium Front Bulkhead (red/DEX210)
A direct replacement for the standard plastic one. Increases stiffness and durability. By installing this 8g heavier bulkhead moves the car's weight balance forward.

TYTD088/(TYTD089) Aluminium Washer 3x8x0.5 (0.75)mm (red/10pcs)
New 0.5mm and 0.75mm washers are added to the line-up of Tresrey aluminium washers.

TYTD095 Aluminium Washer Set (red/26pcs/DEX210)
A complete aluminium washer set for Team Durango DEX210 in Tresrey red.

Source: Tresrey