Team Associated RC10B4.1 2.4GHz RTR Brush Motored 2WD Buggy

Team Associated’s RC10B4 has been proven as a world-class competition buggy with four consecutive IFMAR Worlds Championships and five ROAR National Championships. Equally important are the countless club and regional events that the B4 continues to win.

Designed by the winningest name in RC, Team Associated now brings you this level of high-performance in the new RC10B4.1 RTR. Fully assembled and sharing many of the same components as the RC10B4 Team kit, the RC10B4.1 RTR incorporates upgraded features like a totally new 2.4GHz 3-Channel radio system and SHV1504 MG metal gear steering servo. A Reedy 17-turn motor supplies the power, while the XP SC200 electronic speed control with LiPo cut-off provides smooth throttle control.

XP3-SS 2.4 GHz 3-Channel radio.

 

XPSC200 electronic speed control.

A sealed gear differential improves reliability and allows fine tuning for different surface conditions. Additional upgrades can be made to your RC10B4.1 using a full line of Factory Team B4 hop-ups, as well as Reedy and LRP performance parts. Drive a genuine Team Associated RC10B4.1 RTR into the winner’s circle today, or chances are you’ll be chasing one!

17-turn Reedy motor.

 

Sealed gear differential.

RC10B4.1 RTR Features:

• Built on the 4-time World Champion and 5-time National Champion RC10B4 platform
• XP3-SS 2.4 GHz 3-channel radio system with SHV1504 MG metal gear servo
• XP SC200 electronic speed control with LiPo cut-off, forward and reverse with reverse lock out
• Reedy 17-turn motor
• 2.6:1 ratio gearbox with sealed gear differential, dual-sided adjustable slipper clutch, and rubber sealed ball bearings
• Moulded composite low-CG chassis with set-screw antenna tube lock
• Blue aluminium shock bodies with moulded pre-load clips
• Battery strap with twist-lock thumb knobs
• Rugged steel turnbuckles for adjustable camber and front toe-in
• Angled bellcrank “co-planar” steering with built in servo saver
• Vertical ball ends for roll centre adjustments, front & rear
• Factory finished Interceptor 2.0 polycarbonate body
• Pre-mounted tyres on white dish wheels

Battery strap with twist-lock thumb knobs.

 

Blue aluminium shock bodies with moulded preload clips.

 

Angled bellcrank co-planar steering with built-in servo saver.

RC10B4.1 RTR Specifications:

• Scale: 1:10
• Power : Electric
• Length: 377mm
• Width: 250mm
• Track: 214mm
• Weight: 1530g
• Wheelbase: 288mm
• Internal Gear Ratio: 2.6:1
• Drive: 2WD

#9038   Team Associated RC10B4.1 2.4GHz RTR Brush Motored 2WD Buggy   MSRP: $329.99

Availability: January 2010

 

Source: Team Associated