Dirtz Dialed Partz Torx Screw Kit

 

The latest item from Dirtz Dialed Partz, the accessory line from X Factory’s Brian Kinwald is this torx screw kit to fit the X-6 Squared, X-60 and SCX-60. Brian said. “I’ve used torx head screws on all my cars for over ten years now and they are really dialed on the flat heads under the chassis.”
Torx screws are much less likely to strip and the drivers don’t wear as much either. In some situations, this allows more torque to be applied than with a regular hex head fixing. The DDP kit contains a total of 50  4-40 sized torx head screws with all the correct sized lengths for almost every screw used on the X-6 Squared. There are a few not included as these are not available. Both the cap head and flat head use the same T-10 driver meaning that you need less tools to maintain your X Factory chassis. Dirtz Dialed Partz also sells packs of the individual torx screw sizes including several sizes not needed in the X-6 Squared kit, as well as T-8 and T-10 drivers that features a larger handle to fit the hand and vinyl grips for comfort.

Source: X Factory